@julius.mapili wrote:
Hi,
Seeking assistance how to correct this error thrown. “Get Outlook Mail Messages: The specified folder does not exist”. I have configured my account email as (abc.xyz@email.com) and the mail folder as (Incoming Inbox) since I created one under the “main inbox” folder. Thank you
Posts: 24
Participants: 4
@Chaitan wrote:
So, i am opening the citrix server in IE browser and accessing SAP. But am unable to SPY any element on the screen. I tried TypeInto, Click activities but no luck
Appreciate if any suggestions.Below is the screenshot
Posts: 4
Participants: 2
@Jessica_Moseley wrote:
Hello,
My colleague is sending me a flowchart and when I download it from the email one activity comes up as “Unresolved Activity- This activity is either missing or could not be loaded properly.” We’re working on the same version of UiPath and it works on his end but when he downloads it he also sees the error.
Please help. Thanks!
Cheers,
Jessica
Posts: 6
Participants: 2
@Jake_R wrote:
Hi UIPath Developers,
I’m using data scrapping on a website with addresses. Its pulling all addresses, except those with a dash in the address. For example 1302 Michigan will work, but 1302-1308 Michigan is not returning any result. Has anyone else experienced this issue with the data scraping tool?
Thanks,
Jake
Posts: 2
Participants: 2
@Naveen.Ch wrote:
Hi All,
@loginerror @Pablito @ClaytonMWe are facing issue with Excel.
As soon as reading the data from excel bot is not identified image exist in browser
Work flow steps.
1.read excel
2.check image exist in browser
3.click on browserIf we comment excel flow bot is working end to end.
If un comment bot is hanging as soon as reading the excel template and not throwing an exception as well.
We have tried as soon as reading excel template to click on browser and its working but when we use image exist after reading the excel template not working.
There is no relationship between reading temple and image exist activity in browser …still bot is hanging not throwing any exceptions as well
I have tried giving msg box after reading the template its showing properly as soon as showing msg box bot is not able to find image exist .
Best Regards,
Naveen
Posts: 10
Participants: 5
@vipul.nikki wrote:
Hi,
I am using IBM personal communication to connect to As400 terminal.
In POC the workflow was working fine but now on UAT when we are processing Large files, the system takes some time hardly like 5-6 seconds and during that time, the terminal automatically closes and then the next step in workflow gives error saying - Terminal session not found.
Posts: 2
Participants: 2
@chm wrote:
Hi,
I’ve already tried to install UiPath orchestrator multiple times and I can not reuse the same DB name.
The installation says “The database name provided is already used by an existing database.” although there are no old installations on the system. No installation directory, no database on the db server, nothing in the registry, no ODBC connections.
Where can I delete the database names so I can reuse them?Thank you!
Christian
Posts: 1
Participants: 1
@brady.butler wrote:
I keep having an issue trying to grab a file to open from the open pop up in Google Chrome. It gives me an error. I’ve tried opening an application card for the pop-up but it doesn’t work with my automation (click, type into or select item) and creates an error.
Here is the pop-up box to open the file.
Here is also one of the errors I am getting.
Any help would be awesome, thank you.![Error%20image]()
Posts: 2
Participants: 2
@vishnu_prasad21 wrote:
Hi guys,
I’m working on a project were I use cv vision click activities to click on a particular element that appear on a web application.
So first my bot reads each data from excel and searches on the web application now it has to perform click on an element.
This issue is it works for some loops may be 5 or 7 times but then it throws an error stating that “The computer vision server encountered an error [500]”
But some times it stops at loop two.Can someone explain why we encourage this error?
The selectors are correct and it does not throw an error for that. Only this error appears.
Thanks in advance… .
Posts: 2
Participants: 2
@KavithaManohar wrote:
learning: RPA Developer Production ready
Dear Team,
could, you please look into this issue asap, as it is blocking me to download the certificate.
Thanks,
Kavitha
email: kavithaksk3@gmail.com
username- KAVITHARANI MANOHAR
Posts: 1
Participants: 1
@juelee wrote:
I am getting an error while installing UiPath Studio.
The error message is:
“Service ‘UiPath Robot’ (UiRobotSvc) failed to start. Verify that you have sufficient system previliges to start system services.”This is my personal system and I have admin privileges on this system.
Please advice.
Posts: 18
Participants: 6
@kkhaw wrote:
Hi all,
I’ve been doing the RPA Developer course. In my Main.xml topic, I have errors coming from the TransactionItem.
I’ve attatched screenshots of the areas flagged-which include the GetTransactionData and Process and what they look like, along with the current variables.
Transaction Data
Process
Could the error be from the SetTransactionStatus? I haven’t changed that, in spite of not using queues, but it doesn’t seem to be flagged in the Main.xml at this point. For modifying that, should we eliminate all mentions of the queue? However, I’ve already eliminated all mention of SetTransactionStatus in the workflow, so I don’t believe this is the error.
I don’t know why it’s like this and UiPath isn’t showing me any errors within the argument as well. Can anyone offer any help?
Thank you!
Posts: 3
Participants: 2
@Vuong_Bui wrote:
Hi, i learning the RPA Orchestrator turorials and when i connect robot and orchestrator that issue happen:
i was sure i was did everthing sam the tutorials video. i was successfull in my fisrt time, but when i remove old server and create new server it not work.
Here are my pictures for issue, please help me:
.
Posts: 42
Participants: 26
@Kyleb91 wrote:
Hi There All,
Please if someone could help with an issue I am having (See attached the .xaml)
The current build is failing due to a selector change.
The Page consists of a potential number of account IDs I need to store into the later assign, but now the selector has changed and not in a similar table fashion such as the xaml shows (ignore the errors), and the find children is not working the same way. I was hoping someone could help me with a solution to still find the children of the new page, it’s still in a similar fashion. Later in the process it iterates through the IDs so Ideally I would keep the tail end of the flow the same, but potentially a way of finding the Ids similarly.
Any thoughts or questions, please get in touch!
Seq1.xaml (9.2 KB)
Posts: 1
Participants: 1
@monikanimbalkar wrote:
im trying to rename existing excel file but im getting illegal character path error please help
this query i fired :
Directory.GetFiles(“C:\Users\FILLION SOLUTIONS\Desktop\Nutan_mail\New folder”+file+"-"+DateTime.Now.ToString(“dd/MM/yyyy”)+".xlsx")
Posts: 4
Participants: 3
@vivek_sivam wrote:
Hi Guys,
When i try to run my flow it will display following error.
Posts: 4
Participants: 4
@Aditi_rathore wrote:
Hi, I’m facing an issue in system login can anyone please help me
Open Browser (ACME System1): Value does not fall within the expected range.
Config.xlsx (20.1 KB)
Thanks, Advance
Posts: 4
Participants: 2
@vivek_sivam wrote:
Hi Guys,
I’m using community edition try to schedule the job and execute the command in command prompt i’m getting
Can some one help me out
Posts: 12
Participants: 3
@vivek_sivam wrote:
Hi team,
I’m try to create a bot. When i select my machine name, Orchaestrator url and machine key and click on connect getting below error
Posts: 2
Participants: 2
@vivek_sivam wrote:
Hi Guys,
When i try to execute command in command prompt i’m getting “a robot with username is not defined in orchestrator”
Thanks
Posts: 7
Participants: 2
