Hi
Data scraping showing zero rows sometimes. Once I logout of web app/restart the studio then it will show zero rows agin dev has to scrap it…it will start working.
Selectors remain same. Wild cards used, fuzzy match also used.
Pls suggest soln ASAP
18 posts - 4 participants
I am trying to get a storage account from an Azure Resource Group. I am getting the error below.
Get Storage Account: An error has occurred. Please check the logs Error: Could not load type ‘Microsoft.Azure.Management.Storage.Fluent.Models.SkuName’ from assembly ‘UiPath.Azure, Version=1.1.4.0, Culture=neutral, PublicKeyToken=null’ due to value type mismatch.
Here is the properties
And the xaml layout
It is running through the ‘Get Resource Group’ without issue and correctly assigning variable. It then throws up on the ‘Get Storage Account’
Any thoughts? Thanks for the help!
1 post - 1 participant
Hello! Help me please. I have 2 Word documents containing unstructured information on organizations. In both files, the organizations are the same, the numerical indicators are different. For each of these Word documents, I perform a sequence of actions in a for each loop. First, I use regular expressions to extract the metric information I need for each company using regular expressions and store it in a separate array for each metric. This way I have 4 arrays (Array1, Array2, Array3, Array4). Next, I add values from all these 4 arrays to the DataTable (dt). At the first pass of the cycle, everything is successful and there are no errors. And during the second pass for the second file, the Add Data Row error appears: The index was outside the array boundaries. Why it happens? I will be grateful for any help.
1 post - 1 participant
Hi,
Am currently exporting my codes over to a laptop from a desktop. However, the DATA SCRAPING selector is not extracting the table from the eml. file. After trying to manually re-indicate the table, this error shows therefore resulting in an empty extractedDataTable.
Any help is appreciated, many thanks!
12 posts - 3 participants
Hi, I need to download files using ftp activities but I can only download all the files using download files activity which is time taking as there are around 2000 files. I want to download only specific files with a prefix “ABC…txt”.
is there anyway we can use get directory in ftp folder ? or any other way to pickup only specific files in version 2019 ?
Regards
Abhi
1 post - 1 participant
Hi Awesome People!
I have no clue that why I am I facing the following error while doing advance certification…
The Arguments as shown below are same as mentioned in excel file
7 posts - 5 participants
Hello,
I am currently facing an issue with testing a process that uses the Java Web Launcher application. When attempting to enter data on a table, the application freezes, and then UiPath Executor crashes, producing the exit code 0xC0000005. The Java application is then unresponsive until it is killed.
Is this issue caused by UiPath, or is it caused by the Java Web Launcher?
9 posts - 4 participants
Hi All,
I am facing build failure when trying to build the project using UiPath Pack in Jenkins.
Reproducing Steps:
Code is published from UiPath Studio to GitHub. ( Working fine )
GitHub is connected to Jenkins using the Http link. (Working fine)
UiPath plugin is installed in Jenkins and the Build is configured using UiPath Pack. (Working fine)
On trying to build by clicking the build now button in Jenkins the build is failing.
Config Page 1
Config Page 2
Config Page 3
GitHub Repo
Note:
Any pointers to the issues will be very much helpful for me.
Thanks in Advance.
Jenkins_log.txt (1.8 KB)
1 post - 1 participant
Hi,
I’ve been trying to build a document understanding framework using regex for invoices. For each supplier I add a new document type. Now I got 19 supplier with all the regex expressions in place.
When I try to add a new supplier, the error icon pops up on the Configuration field in de input properties.
I can’t see what the exact error is because the string in de Configuration field is very long.
Is there a limit in how long the Configuration property can be and so is there a limit how many document types you can add?
I tried to debug so that I was able to export the output and in the txt file I see ‘Line is too long’. But I’m not sure if the output error is to long to mention, or that ‘Line is too long’ is exactly the error.
Thank you for your help!
Kind regards,
Ruben Dekkers
3 posts - 3 participants
Hai everyone,
Here I want to open an Outlook mail meaasages in inbox.
I used here foreach activity and pass dynamic variable but it’s not clicking showing error
The error is showing me is this one:
Can you give suggestions to how can do that part.
Thanks and regards,
Siva.
1 post - 1 participant
Hi I am working on Bank statement csv format,
csv file has a Comma delimiter & in amount column contains comma instead of point for decimal number (& its bank format, fixed) sample csv file - 20201008_USD.zip (597 Bytes)
Any solution for this
Sometimes it runs but all data is in a single column,
sometimes it gives error Read CSV: The CSV file format for is invalid.
1 post - 1 participant
The objective of this Sequence is to find, the maximum and minimum value in the array. I’m facing a lot of issue in finding the output. Please, help me out. Your help is highly appreciated.
Thank you,
1 post - 1 participant
Hello, I’m working with an robot for some time.
Today when I tried to run it, got the message:
Excel Application Scope: Could not open the specified workbook. Make sure there is no other wokbook with the same name already opened.
The problem is that I did not open this file before.
1 post - 1 participant
Dear @balupad14,
I’m using AutoFit colums activity, this activity works fine when the given sheet name exist in excel. But it pops up message box with message ‘Invalid Sheet Name’ when the given sheet name doesn’t exist in the excel. So can you please fix this issue.
BalaReva.Excel.Activities version is 2020.2.1
Thanks In Advance 
,
Ahmed
5 posts - 3 participants
Version: Studio Pro 2020 10.0-beta1008
This version cannot view the values of the assignment, and this version cannot use window key in send hotkey activity.
1 post - 1 participant
Hi,
Im getting ‘cannot connect to packages feed the deployment settings may be invalid’ error when I try to publish my project to the orchestrator. Couldn’t find solution here, the deployment settings are done as in instructional video but my connection to the machine via robot is working ok. Does someone know please what could be the issue?
Thanks in advance
48 posts - 29 participants
Hi,
When I the run process through Studio and when i publish package and run it through robot tray, the process works well and when i run through through batch file pointing to the Nuget package, it stops and in the execution log it throws error as Activity timeout exceeded.
So is there anything i should change with outlook settings? Please help me.
Regards,
Soorya
13 posts - 6 participants
I’m trying up POST jpg-files via REST API but doing it from UIPath results in an image-file that can’t be read. The server receives the file but as “mime”: “application/octet-stream”,
If I do the same operation from Postman the file is perfectly posted as “mime”: “image/jpeg”.
I can not understand what is wrong. I’m told to use form data but when adding that to the headers (Content-Type, Direction: In, Type: String, Value: “multipart/form-data”) I end up with an error message saying:
400 {“error”:“bad_request”,“error_description”:“No uploaded file found. Please upload the file using the multipart/form-data specification”}
Currently I use no headers and no parameters. Only Body format set to multipart/form-data
I’ve read many threads with similar issues but nobody seems to have sorted this out. Anyone succeeded? Since it works so well from Postman I’m starting to think that HTTP Request may be buggy.
8 posts - 3 participants
2 posts - 2 participants
hai i work in one of the MNCs iam trying to build the a bot to send emails using smtp send mail activity but it was giving error
Send SMTP Mail Message: An existing connection was forcibly closed by the remote host
generally when we login to out look we want to type passcode generated automatically by citrix gate way is that causing that error if yes how to over come it
1 post - 1 participant
